Characterization of the Temperature of a Tubular Furnace in Function of its Position
Keywords:
heat treatments, standard instrument, rate of change, standard metrological analysisAbstract
In order to perform heat treatment of bulk and / or thin films materials that require a high rate of change of temperature / time unit, was characterized a tube furnace Terrigeno Industries ESP model number 462, varying the position of standard instrument of temperature from center to the edge of the tube. The result was that the temperature relative to the position has a decreasing exponential behavior and in particular shown the results for changes in temperature of 100 ° C according on the position. The data obtained was subjected to standard metrological analysis to express the results with their uncertainties.
References
Hoel, P.G. (1971). Introduction to Mathematical Statistics. New York. J. Wiley & Sons.
Llamosa, L. E., Meza, L. G., Rodríguez D. L. (2005). Aspectos Metrológicos Fundamentales para la Acreditación de un Laboratorio de Patronamiento Eléctrico. (1° ed.). Colombia: Postergraph S.A.
Rincón J. A., Flórez E. A., Cruz B., Medina M. H. (2011). Procedimiento para el Cálculo de las Especificaciones de Exactitud en el Rango de Temperatura de 700 °C a 1000 °C de un Horno Tubular. Scientia et Technica, 48, 169-172.
Schimd, W. A., Lazos, R. J. (2000). Guía para Estimar la Incertidumbre de la Medición. Centro Nacional de Metrología de México.
Revista Entre Ciencia e Ingeniería .png)
entrecei@ucp.edu.co.png)
ISSN (Impreso) 1909-8367 - ISSN (En Línea) 2539-4169
Attribution-NonCommercial 4.0 International (CC By-NC 4.0)
.png)
Carrera 21 No. 49-95 Av. de las Américas, Pereira, Risaralda, Colombia